FEA FOR PARKING STRUCTURE
![](https://shirsh.com/wp-content/uploads/2024/06/Duel-shed-car-parking-struture-Vehicel-weight.png)
Project Brief This case study demonstrates how Finite Element Analysis (FEA) was used to assess the structural strength of a parking structure. The analysis aimed to determine the load distribution, identify areas of maximum stress and deformation, and propose solutions to enhance structural integrity. CHALLENGES AND OBJECTIVES The client needed to ensure the parking structure […]
STRUCTURAL DESIGN OF WATER PARK TOWER
![](https://shirsh.com/wp-content/uploads/2024/06/Arihant-Model-1.png)
Project Brief This case study showcases the structural design process for a 12-meter water park tower, featuring railings, staircases, and slides at various elevations. The design was executed to meet safety and performance standards. We used STAAD.Pro for structural analysis and SolidWorks for 3D modeling. CHALLENGES AND OBJECTIVES The client required a structurally sound design […]
CFD ANALYSIS OF CLEANROOM FOR PHARMA INDUSTRY
![](https://shirsh.com/wp-content/uploads/2024/05/Pharma-Clean-Room-Results-for-Velocity-Plane.png)
Project Brief This case study showcases the successful application of Computational Fluid Dynamics (CFD) analysis in evaluating temperature, pressure, velocity, relative humidity, particle generation, and tracking with human motion inside a cleanroom for the pharmaceutical industry. Challenges and Objectives The client required a comprehensive analysis of their cleanroom to ensure compliance with strict pharmaceutical industry […]
ABS-Compliant FE Analysis of Winch Strength
![](https://shirsh.com/wp-content/uploads/2024/05/CAD-Model.png)
Project Brief This case study showcases the Finite Element Analysis (FEA) conducted on a winch to verify its strength, adhering to the American Bureau of Shipping (ABS) Rules for Building and Classing Underwater Vehicles, Systems, and Hyperbaric Facilities. The analysis encompassed various loads and conditions to ensure the winch’s reliability and compliance with ABS standards. […]
CFD Analysis of Server Rack Cooling System
![](https://shirsh.com/wp-content/uploads/2024/05/CFD-ANALYSIS-OF-SERVER-CAD-3.png)
This case study presents a comprehensive analysis of a server rack cooling system using Computational Fluid Dynamics (CFD) to optimize performance and adhere to industry standards. Challenges and Objectives Challenges: The client faced issues with potential hotspots, uneven cold air distribution, and inefficient temperature management in their server racks. Objectives: The primary objectives were to […]
CYCLONE SEPARATOR FEA USING ASME SEC VIII DIV 2
![](https://shirsh.com/wp-content/uploads/2022/07/CYCLONE-SEPARATOR.jpg)
Cyclone Separator (device) is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. The objective of this project was to check the design of cyclone separators ( in total three separators working in tandem, for various load cases as mentioned in the objective of […]
CFD of Heat Sink – Thermal Resistance Optimization
![](https://shirsh.com/wp-content/uploads/2021/05/HEAT-SINK.jpg)
Objective of Analyses This work specifically addresses the CFD analysis of the Heat sink module to simulate:- Natural convection cooling for lengths of 200,250,300,400mm. Forced convection cooling for lengths of 200,250,300,400mm. Forced convection cooling with airflow speeds of 2,4,6,8 m/s Temperature stabilization with the time of heat sink for forced and natural convection Optimize the […]
Fixed Tilt Solar Module Mounting System – CFD & FEA
![](https://shirsh.com/wp-content/uploads/2021/05/solar-panel-1024x576.jpg)
In 2011, we have first executed our Solar Module Mounting (MMS) design with field prototyping. From then we have learned and mastered the art of MMS design with optimized weight to stability and strength of MMS. Below is the case study of one of the MMS designed for wind loads at 47m/s (~169Kmph), We have […]